









Atlas OHX10000X 10,000 lb Extra Tall 2-Post Lift
€3,999.00 Original price was: €3,999.00.€2,399.40Current price is: €2,399.40.
Description
The AtlasĀ® OHX10000X two post commercial grade above ground lift is the perfect choice for those large commercial repair facilities or the āMr. Homeownerā who demands the highest quality at the absolute best price. The AtlasĀ® OHX10X is a TRUE 10,000 lb. capacity two post lift that offers a great value to the customer. The AtlasĀ® OHX10000X was engineered and manufactured to lift vehicles ranging from Smart CarsĀ® to a one ton diesel dually. Extra lifting height and extra width between the columns allows the operator to work on all sizes of vehicles and offers a āfudge factorā of about 6 inches when ādriving throughā to another part of the building or lifting the van or āladder truckā. If you are over 6ā² 2ā³, the AtlasĀ® OHX10X has longer cylinders which allow the vehicle to be āliftedā about 3 inches higher than many other lifts.
The AtlasĀ® OHX10X incorporates a single piece 12ā² 7ā³ formed column and an extra long carriage that provides maximum column and arm strength to lift and support a 10,000 lb. vehicle. The single piece columns require the customer to have a ceiling of at least 13 feet to stand the column.
- 10,000 lb. Capacity
- Commercial Grade
- Extra Tall & Extra Wide
- Overall height: 152ā³ (12ā² 8ā³)
- Symmetric arms
- Automatic Arm Restraints
- āPaddedā Shut-Off Bar
- Rubber Covers on Carriages
- Single Point Lock Release
- Dual Direct-Drive Cylinders
- Powder Coat Finish
- Free 12 Piece Truck Adapter Set
- Mounting Hardware Included
- Shipping Weight: 1,665 lbs
- 5 yr Structural ā 2 yr Hydraulic Warranty ā Parts Only
AtlasĀ® ATTD-OHX10000X Specifications | ||
Capacity | 10,000 LB. | |
Overall Height | 152ā³ (12ā 8ā) | |
Overall Floor Width | 144 3/8ā³ (12ā 3/8ā³) | |
Outside Column to Outside Column | 136ā³ (11ā 4ā³) | |
Maximum Lift Height (Without Adapters) | 74 3/4ā³ | |
Maximum Lift Height (With Adapters) | 85 3/4ā³ | |
Minimum Arm Height | 4 1/2ā³ | |
Inside Column | 118 1/4ā (9ā 10 1/4ā) | |
Drive Thru | 106 7/8ā (8ā 10 7/8ā) | |
Column Size | 9 1/8ā³ x 11ā³ | |
Column Thickness of Steel | 5mm | |
Base Of Lift | 18 1/2ā³ x 21 1/2ā³ | |
Motor/Electrical Requirement | 220 volt single (1) phase. A 30 amp breaker is recommended |
|
Oil Requirement | 3-5 Gallons AW32/AW46 (NOT INCLUDED) | |
Shipping Weight | 1,665 LBS. | |
Adapter Heights | 4 Each 2ā, 3ā, 6ā | |
Arm Hole/Adapter Peg Size | 1.5ā | |
Requires a minimum of 4ā³ of concrete with a 3000 psi. rating |